The Ultimate FX Thread

Home :: Post and find Controller Mappings :: The Ultimate FX ThreadReply
The Ultimate FX Thread
Posted on: 19.11.2012 by Valeri Millstein
Introduction and Goals of "The Ultimate FX Thread"

This thread is going to be dedicated to posting an evolving list of FX parameters. Anyone who has any custom instant press, Super Fader, Super Knob or Jog FX mappings, please post them on here so others can learn how to map FX and eventually create their own. Thanks, lets hope this gets good feedback!

This thread now contains all of the Instant Gratification parameters!
Soon to have Jog FX parameters!

TABLE OF CONTENTS:

Post 2: Instant Press FX, Instant Grat

Post 3: Smart Knobs

Post 4: Jog Wheels

Post 5: Specials

Post 6: TSI Files
Loyce Mekonen
28.11.2012
Originally Posted by Stewe
That's smart knob actually. What makes it super knob is ability to send more then one MIDI CC and note massages all from one fader/knob just like MFpro firmware does. It's something like this:
Hmm... Note Massages... I'll make sure to map a button for that

Thanks for clarifying on the super knob/smart knob thing.
Kellie Myrum
27.11.2012
Originally Posted by The Pancaker
No problem man! I actually mapped a bunch of super knobs on my X1.. will see if I get around to posting them. One of them is ArmyofMe's sweep n' drama effect, the other one I can't remember since I rarely use it anyway lol.
That's smart knob actually. What makes it super knob is ability to send more then one MIDI CC and note massages all from one fader/knob just like MFpro firmware does. It's something like this:



I tried going the white noise sample route some time ago but in the end I just couldn't get used to having a separate track just for that.
I use one deck in sample mode for stuff such as this and other three decks for mixing tracks. You can effectively use loop rec to bring samples as well.

Keep posting mate and let's make this thread living
Loyce Mekonen
27.11.2012
Originally Posted by Stewe
Thanks for contribute! I don't have controller ATM to check your parameters but can imagine how it sounds since I was experimenting on white noise as well. Found that Drive, LOFI and T3 Reverb with right amount of parameters can bring it close to original. I ended to use white noise sample when mixing techno and psy.

Here is the sample of it if somebody want to do the same:White_Noise.zip

No problem man! I actually mapped a bunch of super knobs on my X1.. will see if I get around to posting them. One of them is ArmyofMe's sweep n' drama effect, the other one I can't remember since I rarely use it anyway lol.

I tried going the white noise sample route some time ago but in the end I just couldn't get used to having a separate track just for that.
Laurice Jessing
27.11.2012		Super Knob FX: Instant Build Up, Do I need a Button or a Knob? I want to do it with the Jog Wheel?

?: Add in > FX Unit > Modifier X / type- knob / mode-relative / rotary sensitivity - 10% / rotary acceleration - 0%: = Modifier X my Jog Wheel?
OK: Add in > FX Unit > Button 1 / type- button / mode-direct / value - 1 (I use Hold, is that ok?)
OK: Add in > FX Unit > Button 2 / type- button / mode-direct / value - 1 (I use Hold, is that ok?)
?: Add in > FX Unit > Button 3 / type- button / mode-direct / value - 1 / Modifier X - 3, I dont understand this?
?: Add in > FX Unit > Button 3 / type- button / mode-direct / value - 0 / Modifier X - 2, I dont understand this?
?: Add in > FX Unit > D/W Adjust / type- knob / mode-direct, (Do I need a Value? I don't have a knob, just button)
?: Add in > FX Unit > Knob 1 / type- knob / mode-direct, (Do I need a Value? I don't have a knob, just button)
?: Add in > FX Unit > Knob 2 / type- knob / mode-direct, (Do I need a Value? I don't have a knob, just button)
?: Add in > FX Unit > Knob 3 / type- knob / mode-direct, (Do I need a Value? I don't have a knob, just button)
Add in > FX Unit > FX Unit mode selector / type- button / mode-direct / value- group

please excuse me for the inconvenience but I'm trying to learn the mapping and it is verry hard.
Thx again
Werner Bile
27.11.2012
Originally Posted by Madsoldier
Can you give the mapping in tekst like on this first page of the thread. I believe thats the reason of the thread. It's easyer than to inport your tsi and analyse it. No hard feelings I hope

To 0Notice and Stewe, can you place the good FX Mappings on the first page?

Thx, Mad
sorry if that came off as dismissive, here's the macro jog effects section of the mapping.

Mapped to fader
Add in > FX Unit > DryWet / type-fader/ mode-direct

Mapped to jog wheel TOUCH

Add in > mixer > Effect unit on / type-button / mode-hold/deck A
Add in > mixer > Effect unit on / type-button / mode-hold/deck B (Invert) (and vice versa, depending which deck you’re mapping for)
Add in > FX Unit > Button 1 / type-button / mode-hold

Mapped to jog wheel ROTATION

Add in > FX Unit > Knob 1 / type-encoder/ mode-relative

mapped to each selector button

Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Laserslice(or whatever)
Add In > FX Unit > Knob 1 / type-button / mode-direct / value-0.500
Add In > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-group
Add in > FX Unit > FX Store preset / type-button / mode-trigger
Werner Bile
27.11.2012
Originally Posted by Madsoldier
Can you give the mapping in tekst like on this first page of the thread. I believe thats the reason of the thread. It's easyer than to inport your tsi and analyse it. No hard feelings I hope

To 0Notice and Stewe, can you place the good FX Mappings on the first page?

Thx, Mad
I only posted it in case anyone had a specific need for it, there's nothing in there with a mapping complicated enough to require listing out the steps. the drama sweep effect is already listed and the rest is just mapping basic fx controls.
Laurice Jessing
27.11.2012
Originally Posted by MWagner
Here's a quick and easy mapping I threw together for anyone who, like me, has an old numark mixtrack lying around that they no longer use. It controls any 4 of the macro fx through the mixtrack's jog wheels.]
Can you give the mapping in tekst like on this first page of the thread. I believe thats the reason of the thread. It's easyer than to inport your tsi and analyse it. No hard feelings I hope

To 0Notice and Stewe, can you place the good FX Mappings on the first page?

Thx, Mad
Werner Bile
28.11.2012		Here's a quick and easy mapping I threw together for anyone who, like me, has an old numark mixtrack lying around that they no longer use. It controls any 4 of the macro fx through the mixtrack's jog wheels.

https://maps.djranking s.com/mappings/950
Kellie Myrum
27.11.2012
Originally Posted by The Pancaker
I usually assign it to an empty deck with gain bumped up quite a bit. The final end of the effect sounds kinda dirty and glitchy though so I don't usually go there. It'd be awesome if someone tried it and improved it.
Thanks for contribute! I don't have controller ATM to check your parameters but can imagine how it sounds since I was experimenting on white noise as well. Found that Drive, LOFI and T3 Reverb with right amount of parameters can bring it close to original. I ended to use white noise sample when mixing techno and psy.

Here is the sample of it if somebody want to do the same:White_Noise.zip
Loyce Mekonen
27.11.2012		Super Knob

White Noise (ish) effect

Add in > FX Unit > Effect Selector 1 / type-button / mode-direct / value- Gater
Add in > FX Unit > Effect Selector 2 / type-button / mode-direct / value- Mulholland Drive
Add in > FX Unit > Effect Selector 3 / type-button / mode-direct / value- Peak Filter
Add in > FX Unit > Button 1 / type- button / mode-Hold
Add in > FX Unit > Button 2 / type- button / mode-Hold
Add in > FX Unit > Button 3 / type- button / mode-Hold
Add in > FX Unit > Button 3 / type- button / mode-Hold
Add in > FX Unit > D/W Adjust / type- knob / mode-direct
Add in > FX Unit > Knob 1 / type- knob / mode-relative / Rotary Sensivity - 23% / Rotary Acceleration - 0%
Add in > FX Unit > Knob 2 / type- knob / mode-relative / Rotary Sensivity - 100% / Rotary Acceleration - 0%
Add in > FX Unit > Knob 3 / type- knob / mode-relative / Rotary Sensivity - 70% / Rotary Acceleration - 20%

Make same FX unit assignment for all commands.

I usually assign it to an empty deck with gain bumped up quite a bit. The final end of the effect sounds kinda dirty and glitchy though so I don't usually go there. It'd be awesome if someone tried it and improved it.
Laurice Jessing
27.11.2012		Perfect Thread,

You can expect alot of questions (also from me).
Kellie Myrum
21.11.2012
Originally Posted by MWagner
I'm a little confused, on this one:



Doesn't this line prevent the effect from turning on at all?
Button 3 is doing the trick here. No need for FX unit to be on... You sure to try it out?
Werner Bile
20.11.2012		I'm a little confused, on this one:

Originally Posted by 0Notice
Istant Press FX

Turntable 'Rewind'

Add In > FX Unit > Effect Selector / type-button / mode-direct / value-TurntableFX
Add In > FX Unit > Dry/Wet / type-button / mode-direct / value-0.500
Add In > FX Unit > Knob 1 / type-button / mode-direct / value-1.000
Add In > FX Unit > Knob 2 / type-button / mode-direct / value-0.555
Add In > FX Unit > Knob 3 / type-button / mode-direct / value-0.511
Add In > FX Unit > Unit On / type-button / mode-direct / value-0
Add In > FX Unit > Button 2 / type-button / mode-direct / value-0
Add In > FX Unit > Button 3 / type-button / mode-hold (or toggle)
Add In > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-single
Add In > FX Unit > FX Store Preset / type-button / mode-trigger

Make same FX unit assignment for all commands.

Submitted by: Stewe
Doesn't this line prevent the effect from turning on at all?

Originally Posted by 0Notice
Add In > FX Unit > Unit On / type-button / mode-direct / value-0
Delena Katherman
20.11.2012		Agreed!
Werner Bile
20.11.2012		Thanks for making this thread, very useful.
Valeri Millstein
19.11.2012		Reserved 5.
Valeri Millstein
19.11.2012		Coming soon!
Valeri Millstein
19.11.2012		Specials

Laser Stretch

D/W set at 100% (direct-hold)
Beatmasher w/ (4) buttons each launching parameter values at 50%, 70% 90%, & 100% (Hold-on)
LaserSlicer w/ a Fader controlling 50-0% of parameter value (inverted control)
Strrretch w/ a fader controlling 50-100% of paramerter value.
Faders have to be in realitve mode w/ sensitivity @70% and accelertion @0%
(1) Button (hold-on) to turn on both MacroFX. **Note MacroFX are not active if paramter value is at 50%.
Start w/ faders are all the way down and set LaserSlicer and Strretch slow macro at parameter value 50% initially before controlling.



Submitted by: jthightower45
Valeri Millstein
19.11.2012		Jog Fx

Ean Golden Jog Peak/Delay FX Edit

Made for S4

All of the 0Notice Jog Fx will be mapped with Group Fx on Unit 1 and Single on Unit 2.

FX Unit mode selector > Fx Unit 1 > Button > Direct > Group
FX Unit mode selector > Fx Unit 2 > Button > Direct > Single

All Assigned to Jog Touch:

Effect 1 Selector > Fx Unit 1 > Button > Direct > Beatmasher 2
Effect 2 Selector > Fx Unit 1 > Button > Direct > Peak Filter
Effect 1 Selector > Fx Unit 2 > Button > Direct > Delay
Button 1 > Fx Unit 1 > Button > Hold
Button 2 > Fx Unit 1 > Button > Hold
Dry/Wet Adjust (Fx Unit) > Fx Unit 1 > Button > Direct > 1
Knob 1 > Fx Unit 1 > Button > Direct > .5
Knob 2 > Fx Unit 1 > Button > Direct > .6
Unit On > Fx Unit 2 > Button > Hold
Dry/Wet Adjust (Fx Unit) > Fx Unit 2 > Button > Direct > .25
Knob 1 > Fx Unit 2 > Button > Direct > .1
Knob 2 > Fx Unit 2 > Button > Direct > .1
Knob 3 > Fx Unit 2 > Button > Direct > .3

All Assigned to Jog Encoder:

Dry/Wet adjust (Fx Unit) > Unit 1 > Encoder > Relative > R.S. = 70% > R.A = 0%
Knob 1 > Unit 1 > Encoder > Relative > R.S. = 100% > R.A. = 0%
Knob 2 > Unit 1 > Encoder > Relative > R.S. = 90% > R.A. = 0%
Valeri Millstein
19.11.2012		Smart Knob FX

Instant Build Up

Add in > FX Unit > Effect Selector 1 / type-button / mode-direct / value- Iceverb
Add in > FX Unit > Effect Selector 2 / type-button / mode-direct / value- Peak Filter
Add in > FX Unit > Effect Selector 3 / type-button / mode-direct / value- Reverb
Add in > FX Unit > Modifier X / type- knob / mode-relative / rotary sensitivity - 10% / rotary acceleration - 0%
Add in > FX Unit > Button 1 / type- button / mode-direct / value - 1
Add in > FX Unit > Button 2 / type- button / mode-direct / value - 1
Add in > FX Unit > Button 3 / type- button / mode-direct / value - 1 / Modifier X - 3
Add in > FX Unit > Button 3 / type- button / mode-direct / value - 0 / Modifier X - 2
Add in > FX Unit > D/W Adjust / type- knob / mode-direct
Add in > FX Unit > Knob 1 / type- knob / mode-direct
Add in > FX Unit > Knob 2 / type- knob / mode-direct
Add in > FX Unit > Knob 3 / type- knob / mode-direct
Add in > FX Unit > FX Unit mode selector / type- button / mode-direct / value- group

Make same FX unit assignment for all commands.

Submitted by: 0Notice

White Noise (ish) effect

Add in > FX Unit > Effect Selector 1 / type-button / mode-direct / value- Gater
Add in > FX Unit > Effect Selector 2 / type-button / mode-direct / value- Mulholland Drive
Add in > FX Unit > Effect Selector 3 / type-button / mode-direct / value- Peak Filter
Add in > FX Unit > Button 1 / type- button / mode-Hold
Add in > FX Unit > Button 2 / type- button / mode-Hold
Add in > FX Unit > Button 3 / type- button / mode-Hold
Add in > FX Unit > Button 3 / type- button / mode-Hold
Add in > FX Unit > D/W Adjust / type- knob / mode-direct
Add in > FX Unit > Knob 1 / type- knob / mode-relative / Rotary Sensivity - 23% / Rotary Acceleration - 0%
Add in > FX Unit > Knob 2 / type- knob / mode-relative / Rotary Sensivity - 100% / Rotary Acceleration - 0%
Add in > FX Unit > Knob 3 / type- knob / mode-relative / Rotary Sensivity - 70% / Rotary Acceleration - 20%

Make same FX unit assignment for all commands.

Submitted by: The Pancaker

The Stewe Build

Effect ON/reset button (Unit #1):
Add In > FX Unit > Unit On / button-toggle
Add In > FX Unit > Button 2 / button-toggle
Add In > FX Unit > Button 3 / button-direct / value=0
Add In > FX Unit > Effect Selector / button-direct / value=Tape Delay
Add In > FX Unit > FX Unit Mode Selector / direct-Single
note: Before you engage the effect button 2 should be ON in order for mapped BUTTON to toggle between 'unit ON' and 'button 2' on each press.

Macro knob:
Add In > FX Unit > Dry/Wet / fader-relative / rotary sensitivity=80% ; acceleration=0% / Unit 1
Add In > FX Unit > Knob 1 / button-direct / value=0.620 / Unit 1
Add In > FX Unit > Knob 2 / button-direct / value=0.690 / Unit 1
Add In > FX Unit > Knob 3 / fader-direct / Unit 1
Add In > FX Unit > Dry/Wet / fader-relative / rotary sensitivity=65% ; acceleration=0% / Unit 2
Add In > FX Unit > Knob 1 / fader-relative / rotary sensitivity=55% ; acceleration=0% / Unit 2
Add In > FX Unit > Knob 2 / button-direct / value=0.050 / Unit 2
Add In > FX Unit > Knob 3 / button-direct / value=0.850 / Unit 2
Add In > FX Unit > Button 1 / button-hold / Unit 2
Add In > FX Unit > Button 2 / button-hold / Unit 2
Add In > FX Unit > Button 3 / button-hold / Unit 2
Add In > FX Unit > Effect Selector / button-direct / value=Transpose Stretch / Unit 2
Add In > FX Unit > Effect Selector / button-direct / value=Reverb / Unit 2
Add In > FX Unit > Effect Selector / button-direct / value=Peak Filter / Unit 2
Add In > FX Unit > FX Unit Mode Selector / direct-Group / Unit 2
note: Before using this knob, Transpose should be set for 0.500
Valeri Millstein
19.11.2012		 Instant Press FX

Turntable 'Rewind'

Add In > FX Unit > Effect Selector / type-button / mode-direct / value-TurntableFX
Add In > FX Unit > Dry/Wet / type-button / mode-direct / value-0.500
Add In > FX Unit > Knob 1 / type-button / mode-direct / value-1.000
Add In > FX Unit > Knob 2 / type-button / mode-direct / value-0.555
Add In > FX Unit > Knob 3 / type-button / mode-direct / value-0.511
Add In > FX Unit > Unit On / type-button / mode-direct / value-1
Add In > FX Unit > Button 2 / type-button / mode-direct / value-0
Add In > FX Unit > Button 3 / type-button / mode-hold (or toggle)
Add In > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-single
Add In > FX Unit > FX Store Preset / type-button / mode-trigger

Make same FX unit assignment for all commands.

1 Button Masher Combo

First press:
-Set Fx units #2 and #3 to group mode
-Set M1=1
-Loading Beatmasher to unit #2 and Transpose Stretch to unit #3
-Set dry/wet to max-1.000 at both FX units
-Set Beatmasher amount to 0.600
-Set Transpose Stretch amount to 1.000 (ready)
-Beatmasher on (direct 1)

Second press:
-Set M1=2
-Set Beatmasher amount to 0.800

Third press:
-Set M1=3
-Set Beatmasher ammount to 0.900

Fourth press and hold:
-Set M1=4
-Set Beatmasher amount to 1.000
-Decrease Transpose amount (sweep)
-Transpose on (hold)

Submitted by: Stewe

4 Button Ramp Delay

This is an effect that Dubfire uses a lot. I believe it pretty cool for making transitions between tracks or for spicing up tracks on the fly.

Make sure to set FX Unit in to single effect mode

Button 1:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.500

Button 2:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.650

Button 3:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.800

Button 4:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.950

Demonstration Video!



Instant Grat Values

Button 1: Reverb, fx1, unit2


Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-direct / value-0.300
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Reverb
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger


Button 2: T3Delay, fx3, unit3

Add in > FX Unit > DryWet / type-fader / mode-direct (returns d/w back to zero on release)
Add in > FX Unit > DryWet / type-button / mode-direct / value-0.700
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.700
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-T3Delay
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger
: F92-0, fxButton1, unit3

Button 2: T3Delay, fx3, unit3

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.300
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-F92-0
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Echo Freeze

Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Delay
Add in > FX Unit > Unit On / type-button / mode-toggle
Add in > FX Unit > Button 2 / type-button / mode-toggle
Add in > FX Unit > Button 3 / type-button / mode-direct / value-0
Add in > FX Unit > DryWet / type-button / mode-direct / value-0.300
Add in > FX Unit > Knob 1 / type-button / mode-direct / value-0.600
Add in > FX Unit > Knob 2 / type-button / mode-direct / value-0.400
Add in > FX Unit > Knob 3 / type-button / mode-direct / value-0.300
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Single
Add in > FX Unit > FX Store preset / type-button / mode-Trigger

4 Button Maher Combo

Button 1:

Add in > Modifier 1 > type-button / mode-hold > value=1
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type button / mode-direct / value=0.600
Add in > FX Unit > Knob 2 > type button / mode-direct / value=1.000
Add in > FX Unit > Button 1 > type button / mode-hold
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 2:

Add in > Modifier 1 > modCon - M1=1 / type-button / mode-hold > value=2
Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=0.800
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Effect Selector > type-button / mode-direct / value=Beatmasher
Add in > FX Unit > FX Unit Mode > type-button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type-button / mode-trigger

Button 3:

Add in > Modifier 1 > modCon - M1=2 / type-button / mode-hold > value=3
Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Dry/Wet > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=0.900
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > Effect Selector > type button / mode-direct / value=Transpose Stratch
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 4:

Add in > Modifier 1 > type-button / mode-direct (inverted)> value=0
Add in > FX Unit > Knob 1 > type-button / mode-direct / value=1.000
Add in > FX Unit > Knob 2 > type-button / mode-dec > button options / auto repeat / resolution-Coarse
Add in > FX Unit > Knob 3 > type-button / mode-direct / value=0.740
Add in > FX Unit > Knob 3 > type-button / mode-dec > button options / auto repeat / resolution-Default
Add in > FX Unit > Button 1 > type-button / mode-hold
Add in > FX Unit > Button 2 > modCon - M1=3 / type-button / mode-hold
Add in > FX Unit > Button 2 > type-button / mode-direct (inverted) / value=0
Add in > FX Unit > Button 3 > modCon - M1=3 / type-button / mode-hold
Add in > FX Unit > Button 2 > type-button / mode-direct (inverted) / value=0
Add in > FX Unit > Effect 1 Selector > type button / mode-direct / value=Beatmasher
Add in > FX Unit > Effect 3 Selector > type button / mode-direct / value=Filter
Add in > FX Unit > FX Unit Mode > type button / mode-direct / value=Group
Add in > FX Unit > FX Store Preset > type button / mode-trigger

Button 1: Gater, fx1, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-ditect / value-0.500
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 2: Gater, fx1, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 1 / type-button / mode-ditect / value-0.700
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 1 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 3: F-0, fx2, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 2 / type-button / mode-ditect / value-0.400
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 2 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

Button 4: LOFI, fx3, unit1

Add in > FX Unit > DryWet / type-button / mode-direct / value-1.000
Add in > FX Unit > Knob 3 / type-button / mode-ditect / value-0.3.00
Add in > FX Unit > Effect Selector / type-button / mode-direct / value-Gater
Add in > FX Unit > Button 3 / type-button / mode-hold
Add in > FX Unit > FX Unit Mode Selector / type-button / mode-direct / value-Group
Add in > FX Unit > FX Store preset / type-button / mode-trigger

HELL Yeah! Huge thanks goes out to Stewe who provided many of these parameters so everyone could map their own controllers to do great things!

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy