Midi Fighter Deckalized Mapping

Home :: MIDIfighter Resources and Discussion :: Midi Fighter Deckalized MappingReply
Midi Fighter Deckalized Mapping
Posted on: 26.05.2010 by Jodi Lacerra
There is a new official DJ Techtools Deck specific mapping for the Midi Fighter and Traktor Pro called, "MF_Deckalized.tsi". See the attached button layout for features and functionality.

Fun Fact: Ean has been using this mapping recently to DJ using solely two Midi Fighters (one for Deck A and one for Deck B) and an external mixer.

Upon importing the tsi, the controller manager will show four labeled device mappings (one for each Deck, A/B/C/D). You will need to set the In and Out Ports to your Midifighter(s) for the applicable Decks you want to control.

A cool new function (that may not be obvious to users at first) is the Sample Slicer. After using the Record/Sampler button to craft a sample on the fly, you can go into the Sample Slicer mode by holding Shift and pressing the Record/Sampler button again. To indicate you've moved into the Slicer mode, all of the bottom 8 button's LEDs will light up as a visual cue. You can then Slice up the sample to make some really interesting sounds by pressing any of those bottom 8 buttons. Try it out for yourself!

There is also a Juggle Mode which can be activated by pressing Shift and the Record/Sampler button while the Sampler is not active (the visual cue for this is every other of the bottom 8 LEDs lighting up). This makes the bottom 8 buttons Select or Store Hotcues 1-8 (you can delete the Cue points by using Shift and the appropriate Hotcue button).

Also, for those of you that are unaware, I created FOCUS versions of the MF Deckalized mapping that allow you to use 1 Midi Fighter to control either 2 decks (A/B) or all 4 decks (A/B/C/D). With the focus mappings you get all the same functions and you are able to control the Deck that is currently selected as the "Focus" (i.e., highlighted orange).

The only difference is that the (Shift+Sync) subfunction which was "Load Next Song" in the original Deckalized mapping is now "Deck Focus Select" which will toggle the Deck Focus through decks A/B or all four respectively (see Focus layout jpeg).

As we work to create and improve future Midi Fighter mappings, we will be taking your input into consideration so please share your thoughts!


http://www.youtube.com/watch?v=7Np3L2myavg

For those familiar with the original Midi Fighter mapping (see http://www.djranking s.com/community /showthread.php?t=10137), the new mapping shares a similar architecture to the original but now offers more hands on features.

Purchase a Midi Fighter here
Jodi Lacerra
13.07.2010
Originally Posted by redgoblin83
I'm testing this mapping out and found that my midi fighter was not enbling the right leds when needed like seen on eans vid.
Can you please clarify what you mean when you say the right LEDs are not being enabled? I'm not sure I understand your issue.
Elnora Wisegarver
12.07.2010
Originally Posted by jthompsn
I'd like to use my midifighter in conjunction with my arcade edition vci. Can anyone walk through the set-up and which one of flashflooders deckalized tsi's would be the best fit.
I also would like to do this but with 2 midifighters
Laquita Coduto
08.07.2010
I'd like to use my midifighter in conjunction with my arcade edition vci. Can anyone walk through the set-up and which one of flashflooders deckalized tsi's would be the best fit.
Jerome Frana
08.07.2010
Dear engineers

I'm testing this mapping out and found that my midi fighter was not enbling the right leds when needed like seen on eans vid.

The controls work as far I went, but you never know in wich mode you are if you activated one. First I though it was my hercules rmx controller but while reloading only the tsi of the deckadized version the version did remain.

What can I do against that.
Elida Ekenstam
06.07.2010
Originally Posted by flashflooder
For those of you who don't have multiple Midi Fighters (yet) or simply want to be able to control all four decks with one Midi Fighter I also created a tsi based on the Deckalized design (MF_Deckalized_Focus.tsi) to accommodate this.

The main difference between the two tsi's is that the subfunction (Shift+_) of the Sync button ("Load Next Song" in MF_Deckalized) changes to "Deck Focus +" which will cycle through decks A to D and will change the Deck layout accordingly.
saw the video of 2 MF and ordered one immediately. Came into the community to ask about how to setup it up for one controller and BOOM flashflooder has already delivered..

my setup is going to be sweet
an arcade edition and the new MF
Dana Ordinario
02.07.2010
Thanks for the great mapping!!!
Jodi Lacerra
07.06.2010
Originally Posted by Hammer
Only thing I've noticed, on the Deck Focus mapping, Deck 2 FX Send 2 keeps turning off as soon as you touch any buttons, meaning it doesnt let you control any of your delay and stuff on deck 2?
Good observation Hammer. It's a bit confusing at first but pushing any of the Filter/Echo/Delay/Record/Roll buttons (all 8 buttons in the middle rows) will turn the appropriate FX bank and type ON to the current Focus Deck and OFF of all the other 3 decks. This way, you cannot accidentally assign an effect to two different decks without realizing it.

Another reason behind this is that some of the effects (i.e., "Roll" aka Beatmasher) sync up to your tempo but there is a slight delay on the initial instance the FX bank gets turned on a Deck. Because of this we have the FX units turning on and staying on once you press any of the Filter/Delay/Roll (FX Bank 2) buttons.

For example, if you switch decks from A to B (after using a Roll on Deck A) and want to use a "Roll" on Deck B, FX Bank 2 will turn off Deck A and on Deck B.

It's a bit of an odd concept at first so please let me know if my explanation is causing more confusion than help.
BOUVIER Pascal
05.06.2010
This has completely blown me away! SO SO SO SO amazing! Cannot believe how good this is!
Well done guys, just as I was getting jealous of the Novation Dicer, this mapping blows my face off!
Well done!

Only thing I've noticed, on the Deck Focus mapping, Deck 2 FX Send 2 keeps turning off as soon as you touch any buttons, meaning it doesnt let you control any of your delay and stuff on deck 2?


Any help
robert chanda
28.05.2010
Love it!

The innovations just don't stop coming.
Harlan Beith
27.05.2010
same, bump for a video of the man
Leeanna Ayla
27.05.2010
Can't wait to see the video of Ean rocking the dual MF's.
Jodi Lacerra
27.05.2010
For those of you who don't have multiple Midi Fighters (yet) or simply want to be able to control all four decks with one Midi Fighter I also created a tsi based on the Deckalized design (MF_Deckalized_Focus.tsi) to accommodate this.

The main difference between the two tsi's is that the subfunction (Shift+_) of the Sync button ("Load Next Song" in MF_Deckalized) changes to "Deck Focus +" which will cycle through decks A to D and will change the Deck layout accordingly.
Jodi Lacerra
27.05.2010
Originally Posted by dafe
Noob question though, what do the roll buttons do?
Yeah you guys got it. "Roll" refers to a "Looproll" which equates to the Beatmasher effect (at various settings) in Traktor.
Scarlett Saupp
26.05.2010
ahh ok, so kinda like the old mapping, except not the row above, but the row below now.
Makes sense!
Johnie Lytton
26.05.2010
Haven't tried out the tsi yet but I believe they are for the beatmasher. Roll ...as in drum roll, possibly.
Scarlett Saupp
26.05.2010
Nice one - liking the idea behind the toggle/hold for the FX buttons.
Gonna give this a whirl at home toevening . Cheers DJTT.
Noob question though, what do the roll buttons do?

<< Back to MIDIfighter Resources and DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy