AKAI LPD8 Mapping for Traktor Pro 2

Home :: Post and find Controller Mappings :: AKAI LPD8 Mapping for Traktor Pro 2Reply
AKAI LPD8 Mapping for Traktor Pro 2
Posted on: 07.10.2011 by Van Slowikowski
Hey peeps just wanted to share my Latest mappings for my Akai LPD8 with Traktor Pro.

This Mapping is great for Beat Juggling, Sample Deck Control & Effects. Also has loop recorder function.

Here are the functions

PROGRAM 1

Pad setting ......

Pads 1-8 - Select, Set & Store Hot cues 1-8 DECK A
Knobs K1-K4 - FX Unit 1 controls (wet/dry, amount etc) *in chained mode only
Knobs K5-K8 - FX Unit 2 controls " " " "

CC setting .....

Pads 1-8 - Select, Set & Store Hot Cues 1-8 DECK B
* Knobs K1-K8 as above

PROGRAM 2

Pad Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY toggle
Pads 1-4 - Sample Deck 4 Slot 1-4 PLAY toggle
Knobs K1-K8 control Effect Units 3&4 (chained Mode Only)

CC Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY Hold
Pads 1-4 - Sample Deck 4 Slot 1-4 Play Hold
Knobs K1-K8 as above

PROGRAM 3

This program gives full control of FX Units 1&2

Pad Setting......

Pad 5 - Modifier 1 or "SHIFT 1" button
Pad 6 - Effect 1 FX unit 1 ON
Pad 6 with SHIFT 1 hold - Scroll thru Effects (Effect 1)
Pad 7 - Effect 2 Fx unit 1 ON
Pad 7 with SHIFT 1 hold - Scroll thru Effects ( Effect 2)
Pad 8 - Effect 3 Fx unit 1 ON
Pad 8 with SHIFT 1 hold - scroll thru effects ( Effect 3 )

Pad 1 - Modifier 2 or "SHIFT 2" Button

Pads 2-4 same operation as 6-8 but for FX unit 2

Knobs k1-k4 - wet/dry & amount FX unit 1
Knobs k5-k8 - wet/dry & amount FX unit 2

CC setting.........

PAD 5 - toggle FX unit 1 from Single to Chained mode
PAD 1 - toggle FX unit 2 from Single to Chained mode

Pads 1-8 also work the same as in "pad setting"

Knobs K1-K8 control wet/dry & amount in single & chained mode.


PROGRAM 4

Pad setting.....

PAD 5 - SHIFT
Pads 6-8 - loop recorder controls
Pad 1 - load recorded loop to Sample Deck 3-1
Pad 2 - " " " " " " 3-2
Pad 3 - " " " " " " 3-3
Pad 4 - " " " " " " 3-4

Knobs K1-K4 control sample deck slot volumes
Knobs K1-K4 with SHIFT HOLD control sample deck slot filter amount/on

CC setting.....

Pads same as above but load to sample deck 4

Knobs K5-K8 same as K!-K4 but control sample deck 4 volume/filter



WOW that took a while to explain. its actually alot easier to use than it sounds.

Here are the files

https://rapidshare.com/files/1909987...or_mapping.tsi
https://rapidshare.com/files/2873388800/Preset_1
https://rapidshare.com/files/777022240/Preset_2
https://rapidshare.com/files/2664577376/Preset_3
https://rapidshare.com/files/2488950644/Preset_4

First u have to load the presets 1-4 in your LPD8 Editor (make sure traktor is closed or this wont work)

Then load the tsi file in Traktors controller manager

then ENJOY
Marti Guzzardi
28.03.2013
Originally Posted by Jon E
Hey peeps just wanted to share my Latest mappings for my Akai LPD8 with Traktor Pro.

This Mapping is great for Beat Juggling, Sample Deck Control & Effects. Also has loop recorder function.

Here are the functions

PROGRAM 1

Pad setting ......

Pads 1-8 - Select, Set & Store Hot cues 1-8 DECK A
Knobs K1-K4 - FX Unit 1 controls (wet/dry, amount etc) *in chained mode only
Knobs K5-K8 - FX Unit 2 controls " " " "

CC setting .....

Pads 1-8 - Select, Set & Store Hot Cues 1-8 DECK B
* Knobs K1-K8 as above

PROGRAM 2

Pad Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY toggle
Pads 1-4 - Sample Deck 4 Slot 1-4 PLAY toggle
Knobs K1-K8 control Effect Units 3&4 (chained Mode Only)

CC Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY Hold
Pads 1-4 - Sample Deck 4 Slot 1-4 Play Hold
Knobs K1-K8 as above

PROGRAM 3

This program gives full control of FX Units 1&2

Pad Setting......

Pad 5 - Modifier 1 or "SHIFT 1" button
Pad 6 - Effect 1 FX unit 1 ON
Pad 6 with SHIFT 1 hold - Scroll thru Effects (Effect 1)
Pad 7 - Effect 2 Fx unit 1 ON
Pad 7 with SHIFT 1 hold - Scroll thru Effects ( Effect 2)
Pad 8 - Effect 3 Fx unit 1 ON
Pad 8 with SHIFT 1 hold - scroll thru effects ( Effect 3 )

Pad 1 - Modifier 2 or "SHIFT 2" Button

Pads 2-4 same operation as 6-8 but for FX unit 2

Knobs k1-k4 - wet/dry & amount FX unit 1
Knobs k5-k8 - wet/dry & amount FX unit 2

CC setting.........

PAD 5 - toggle FX unit 1 from Single to Chained mode
PAD 1 - toggle FX unit 2 from Single to Chained mode

Pads 1-8 also work the same as in "pad setting"

Knobs K1-K8 control wet/dry & amount in single & chained mode.


PROGRAM 4

Pad setting.....

PAD 5 - SHIFT
Pads 6-8 - loop recorder controls
Pad 1 - load recorded loop to Sample Deck 3-1
Pad 2 - " " " " " " 3-2
Pad 3 - " " " " " " 3-3
Pad 4 - " " " " " " 3-4

Knobs K1-K4 control sample deck slot volumes
Knobs K1-K4 with SHIFT HOLD control sample deck slot filter amount/on

CC setting.....

Pads same as above but load to sample deck 4

Knobs K5-K8 same as K!-K4 but control sample deck 4 volume/filter



WOW that took a while to explain. its actually alot easier to use than it sounds.

Here are the files

https://rapidshare.com/files/1909987...or_mapping.tsi
https://rapidshare.com/files/2873388800/Preset_1
https://rapidshare.com/files/777022240/Preset_2
https://rapidshare.com/files/2664577376/Preset_3
https://rapidshare.com/files/2488950644/Preset_4

First u have to load the presets 1-4 in your LPD8 Editor (make sure traktor is closed or this wont work)

Then load the tsi file in Traktors controller manager

then ENJOY
Hi I need the latest maps for this i cant seem to calibrate the Jog wheels anyone got these?
Jada Greenhagen
22.03.2013
Originally Posted by Jon E
Hey peeps just wanted to share my Latest mappings for my Akai LPD8 with Traktor Pro.

This Mapping is great for Beat Juggling, Sample Deck Control & Effects. Also has loop recorder function.

Here are the functions

PROGRAM 1

Pad setting ......

Pads 1-8 - Select, Set & Store Hot cues 1-8 DECK A
Knobs K1-K4 - FX Unit 1 controls (wet/dry, amount etc) *in chained mode only
Knobs K5-K8 - FX Unit 2 controls " " " "

CC setting .....

Pads 1-8 - Select, Set & Store Hot Cues 1-8 DECK B
* Knobs K1-K8 as above

PROGRAM 2

Pad Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY toggle
Pads 1-4 - Sample Deck 4 Slot 1-4 PLAY toggle
Knobs K1-K8 control Effect Units 3&4 (chained Mode Only)

CC Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY Hold
Pads 1-4 - Sample Deck 4 Slot 1-4 Play Hold
Knobs K1-K8 as above

PROGRAM 3

This program gives full control of FX Units 1&2

Pad Setting......

Pad 5 - Modifier 1 or "SHIFT 1" button
Pad 6 - Effect 1 FX unit 1 ON
Pad 6 with SHIFT 1 hold - Scroll thru Effects (Effect 1)
Pad 7 - Effect 2 Fx unit 1 ON
Pad 7 with SHIFT 1 hold - Scroll thru Effects ( Effect 2)
Pad 8 - Effect 3 Fx unit 1 ON
Pad 8 with SHIFT 1 hold - scroll thru effects ( Effect 3 )

Pad 1 - Modifier 2 or "SHIFT 2" Button

Pads 2-4 same operation as 6-8 but for FX unit 2

Knobs k1-k4 - wet/dry & amount FX unit 1
Knobs k5-k8 - wet/dry & amount FX unit 2

CC setting.........

PAD 5 - toggle FX unit 1 from Single to Chained mode
PAD 1 - toggle FX unit 2 from Single to Chained mode

Pads 1-8 also work the same as in "pad setting"

Knobs K1-K8 control wet/dry & amount in single & chained mode.


PROGRAM 4

Pad setting.....

PAD 5 - SHIFT
Pads 6-8 - loop recorder controls
Pad 1 - load recorded loop to Sample Deck 3-1
Pad 2 - " " " " " " 3-2
Pad 3 - " " " " " " 3-3
Pad 4 - " " " " " " 3-4

Knobs K1-K4 control sample deck slot volumes
Knobs K1-K4 with SHIFT HOLD control sample deck slot filter amount/on

CC setting.....

Pads same as above but load to sample deck 4

Knobs K5-K8 same as K!-K4 but control sample deck 4 volume/filter



WOW that took a while to explain. its actually alot easier to use than it sounds.

Here are the files

https://rapidshare.com/files/1909987...or_mapping.tsi
https://rapidshare.com/files/2873388800/Preset_1
https://rapidshare.com/files/777022240/Preset_2
https://rapidshare.com/files/2664577376/Preset_3
https://rapidshare.com/files/2488950644/Preset_4

First u have to load the presets 1-4 in your LPD8 Editor (make sure traktor is closed or this wont work)

Then load the tsi file in Traktors controller manager

then ENJOY
Can you please repost your files? Thanks!
Aleen Kennelley
19.03.2012
Originally Posted by xan173
same here, preset 2 has a file size of 0.0mb
Here's a new upload on different server. Hope it stays online for a while now.
What concerns the filesize, don't be fooled what it says. They are indeed small files (< 1kB).

http://www.fileserve.com/file/VbTSUvR/LPD8 mapping.rar
Sparkle Weberg
18.03.2012
Originally Posted by Perdut
Here are working links for those who want :

https://rapidshare.com/files/318430139/Preset_2;
https://rapidshare.com/files/1672286418/Preset_3;
https://rapidshare.com/files/1795200...r_mapping.tsi;
https://rapidshare.com/files/2352247183/Preset_1;
https://rapidshare.com/files/3639921541/Preset_4;
thx. but they still are not working. it says file was deleted or something :/
Sparkle Weberg
16.03.2012
Originally Posted by xan173
Same here, could somebody please upload preset 2 again? Thanks.
+1
Hazel Norgrove
16.03.2012
Originally Posted by DJ Moneypulation
I can't download preset 2.

Can anyone send it to me or tell me where I can download the proper one?

I'd be very thankful.

Cheers dudes
Same here, could somebody please upload preset 2 again? Thanks.
Socorro Koppinger
19.09.2013		Anyone would reupload files? This mapping looks amazing!
Socorro Koppinger
19.09.2013		Hi, anyone would upload the files one more time?
Marti Guzzardi
28.03.2013
Originally Posted by Jon E
Hey peeps just wanted to share my Latest mappings for my Akai LPD8 with Traktor Pro.

This Mapping is great for Beat Juggling, Sample Deck Control & Effects. Also has loop recorder function.

Here are the functions

PROGRAM 1

Pad setting ......

Pads 1-8 - Select, Set & Store Hot cues 1-8 DECK A
Knobs K1-K4 - FX Unit 1 controls (wet/dry, amount etc) *in chained mode only
Knobs K5-K8 - FX Unit 2 controls " " " "

CC setting .....

Pads 1-8 - Select, Set & Store Hot Cues 1-8 DECK B
* Knobs K1-K8 as above

PROGRAM 2

Pad Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY toggle
Pads 1-4 - Sample Deck 4 Slot 1-4 PLAY toggle
Knobs K1-K8 control Effect Units 3&4 (chained Mode Only)

CC Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY Hold
Pads 1-4 - Sample Deck 4 Slot 1-4 Play Hold
Knobs K1-K8 as above

PROGRAM 3

This program gives full control of FX Units 1&2

Pad Setting......

Pad 5 - Modifier 1 or "SHIFT 1" button
Pad 6 - Effect 1 FX unit 1 ON
Pad 6 with SHIFT 1 hold - Scroll thru Effects (Effect 1)
Pad 7 - Effect 2 Fx unit 1 ON
Pad 7 with SHIFT 1 hold - Scroll thru Effects ( Effect 2)
Pad 8 - Effect 3 Fx unit 1 ON
Pad 8 with SHIFT 1 hold - scroll thru effects ( Effect 3 )

Pad 1 - Modifier 2 or "SHIFT 2" Button

Pads 2-4 same operation as 6-8 but for FX unit 2

Knobs k1-k4 - wet/dry & amount FX unit 1
Knobs k5-k8 - wet/dry & amount FX unit 2

CC setting.........

PAD 5 - toggle FX unit 1 from Single to Chained mode
PAD 1 - toggle FX unit 2 from Single to Chained mode

Pads 1-8 also work the same as in "pad setting"

Knobs K1-K8 control wet/dry & amount in single & chained mode.


PROGRAM 4

Pad setting.....

PAD 5 - SHIFT
Pads 6-8 - loop recorder controls
Pad 1 - load recorded loop to Sample Deck 3-1
Pad 2 - " " " " " " 3-2
Pad 3 - " " " " " " 3-3
Pad 4 - " " " " " " 3-4

Knobs K1-K4 control sample deck slot volumes
Knobs K1-K4 with SHIFT HOLD control sample deck slot filter amount/on

CC setting.....

Pads same as above but load to sample deck 4

Knobs K5-K8 same as K!-K4 but control sample deck 4 volume/filter



WOW that took a while to explain. its actually alot easier to use than it sounds.

Here are the files

https://rapidshare.com/files/1909987...or_mapping.tsi
https://rapidshare.com/files/2873388800/Preset_1
https://rapidshare.com/files/777022240/Preset_2
https://rapidshare.com/files/2664577376/Preset_3
https://rapidshare.com/files/2488950644/Preset_4

First u have to load the presets 1-4 in your LPD8 Editor (make sure traktor is closed or this wont work)

Then load the tsi file in Traktors controller manager

then ENJOY
Hi I need the latest maps for this i cant seem to calibrate the Jog wheels anyone got these?
Jada Greenhagen
22.03.2013
Originally Posted by Jon E
Hey peeps just wanted to share my Latest mappings for my Akai LPD8 with Traktor Pro.

This Mapping is great for Beat Juggling, Sample Deck Control & Effects. Also has loop recorder function.

Here are the functions

PROGRAM 1

Pad setting ......

Pads 1-8 - Select, Set & Store Hot cues 1-8 DECK A
Knobs K1-K4 - FX Unit 1 controls (wet/dry, amount etc) *in chained mode only
Knobs K5-K8 - FX Unit 2 controls " " " "

CC setting .....

Pads 1-8 - Select, Set & Store Hot Cues 1-8 DECK B
* Knobs K1-K8 as above

PROGRAM 2

Pad Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY toggle
Pads 1-4 - Sample Deck 4 Slot 1-4 PLAY toggle
Knobs K1-K8 control Effect Units 3&4 (chained Mode Only)

CC Setting .....

Pads 5-8 - Sample Deck 3 Slot 1-4 PLAY Hold
Pads 1-4 - Sample Deck 4 Slot 1-4 Play Hold
Knobs K1-K8 as above

PROGRAM 3

This program gives full control of FX Units 1&2

Pad Setting......

Pad 5 - Modifier 1 or "SHIFT 1" button
Pad 6 - Effect 1 FX unit 1 ON
Pad 6 with SHIFT 1 hold - Scroll thru Effects (Effect 1)
Pad 7 - Effect 2 Fx unit 1 ON
Pad 7 with SHIFT 1 hold - Scroll thru Effects ( Effect 2)
Pad 8 - Effect 3 Fx unit 1 ON
Pad 8 with SHIFT 1 hold - scroll thru effects ( Effect 3 )

Pad 1 - Modifier 2 or "SHIFT 2" Button

Pads 2-4 same operation as 6-8 but for FX unit 2

Knobs k1-k4 - wet/dry & amount FX unit 1
Knobs k5-k8 - wet/dry & amount FX unit 2

CC setting.........

PAD 5 - toggle FX unit 1 from Single to Chained mode
PAD 1 - toggle FX unit 2 from Single to Chained mode

Pads 1-8 also work the same as in "pad setting"

Knobs K1-K8 control wet/dry & amount in single & chained mode.


PROGRAM 4

Pad setting.....

PAD 5 - SHIFT
Pads 6-8 - loop recorder controls
Pad 1 - load recorded loop to Sample Deck 3-1
Pad 2 - " " " " " " 3-2
Pad 3 - " " " " " " 3-3
Pad 4 - " " " " " " 3-4

Knobs K1-K4 control sample deck slot volumes
Knobs K1-K4 with SHIFT HOLD control sample deck slot filter amount/on

CC setting.....

Pads same as above but load to sample deck 4

Knobs K5-K8 same as K!-K4 but control sample deck 4 volume/filter



WOW that took a while to explain. its actually alot easier to use than it sounds.

Here are the files

https://rapidshare.com/files/1909987...or_mapping.tsi
https://rapidshare.com/files/2873388800/Preset_1
https://rapidshare.com/files/777022240/Preset_2
https://rapidshare.com/files/2664577376/Preset_3
https://rapidshare.com/files/2488950644/Preset_4

First u have to load the presets 1-4 in your LPD8 Editor (make sure traktor is closed or this wont work)

Then load the tsi file in Traktors controller manager

then ENJOY
Can you please repost your files? Thanks!
Earnestine Nulton
28.02.2013		Hey guys , im really really bad at mapping.. but can anybody do a map like this ?

the 8 pads : 6 pads are for macro FX 2 are for selecting on or off on A/B Deck

the knobs are for controlling macro fx or the normal fx
Elton Walin
17.02.2013		Can someone please re-upload this?
Ines Shilow
08.02.2013		This looks like its exactly what I'm looking for but I cant find a mapping of something similar to this anywhere
Wade Lovaas
24.01.2013		None of the links in the post are active so if someone has this mapping or something similar to work with please upload!
Valery Makris
23.07.2012		Aaaand it looks like it's down again. Can anyone re-upload this somewhere?
Shirlene Jauer
10.05.2012		@Ragehappy, sounds like you need a macro, 1 control, multiple signals/actions. See manual. Basically you just map everything to one knob or button, however I dont thing your sending while in program select mode. i.e. you have to select program before you can send first signal like deck focus and hot cue 1. Sure that would be sweet if deck focus could be linked to program select on the Akai in one gesture. I've never tried it. Maybe you would need to configure a signal to send while in program select mode, to do that I suppose maybe you would need Akai software or some kinda programming guru. I suspect the module was underdesigned in this aspect and that this will not be possible. try emailing Akai. Also I've read somewhere that you can get MIDI monitering software?? So maybe if you download that you could capture the signal, if any and details about which MIDI note this is. Just a thought.
Howard Argetsinger
09.05.2012		im making my own mapping of the lpd8 and right now i have it where when in pad mode t plays hot cues 1-8 and when on cc pads 1-4 play/pause decks A-D now im trying to get it where when you press program that the pads 1-4 controll which deck that the hot cues are gunna play from can anybody help me out?
Hazel Norgrove
19.03.2012		Top man. Thanks for going to the trouble.
Aleen Kennelley
19.03.2012
Originally Posted by xan173
same here, preset 2 has a file size of 0.0mb
Here's a new upload on different server. Hope it stays online for a while now.
What concerns the filesize, don't be fooled what it says. They are indeed small files (< 1kB).

http://www.fileserve.com/file/VbTSUvR/LPD8 mapping.rar
Hazel Norgrove
18.03.2012		same here, preset 2 has a file size of 0.0mb
Sparkle Weberg
18.03.2012
Originally Posted by Perdut
Here are working links for those who want :

https://rapidshare.com/files/318430139/Preset_2;
https://rapidshare.com/files/1672286418/Preset_3;
https://rapidshare.com/files/1795200...r_mapping.tsi;
https://rapidshare.com/files/2352247183/Preset_1;
https://rapidshare.com/files/3639921541/Preset_4;
thx. but they still are not working. it says file was deleted or something :/
Aleen Kennelley
16.03.2012		Here are working links for those who want :

https://rapidshare.com/files/318430139/Preset_2;
https://rapidshare.com/files/1672286418/Preset_3;
https://rapidshare.com/files/1795200...r_mapping.tsi;
https://rapidshare.com/files/2352247183/Preset_1;
https://rapidshare.com/files/3639921541/Preset_4;
Sparkle Weberg
16.03.2012
Originally Posted by xan173
Same here, could somebody please upload preset 2 again? Thanks.
+1
Hazel Norgrove
16.03.2012
Originally Posted by DJ Moneypulation
I can't download preset 2.

Can anyone send it to me or tell me where I can download the proper one?

I'd be very thankful.

Cheers dudes
Same here, could somebody please upload preset 2 again? Thanks.
Sparkle Weberg
08.03.2012		I can't download preset 2.

Can anyone send it to me or tell me where I can download the proper one?

I'd be very thankful.

Cheers dudes
Howard Argetsinger
18.01.2012		ok ive got it to start playing i jsut cant figure out how to start controlling the effects with it
:/
Howard Argetsinger
18.01.2012		i had downloaded all this and when i try it its not working it looks like everything uploaded right but im really wanting to use it for pogram 2 but its not working for some odd reason can you help?
Lillie Resue
08.01.2012		Good Mapping..really useful..thx you for your time..
Terence Jennen
12.12.2011		P.S. That must have taken work and I really appriciate it bro
Terence Jennen
12.12.2011		OMG thank you SO much!
Simona Schar
08.11.2011		U can change program on the fly, that's what makes with tiny looking program highly versatile 8 pads+8knobs makes 8*4*2(cc or pad)=64 pads + 8*4=32 faders... The things you have to know about program changes are :
  • you have to press : 1 chg prog buton 2 the button linked to the program you want to use 3 pad button or CC button to switch in pad mode or CC mode... (no default mode... that's sad and might have made this controler a killer controler if there was a default mode...) and then, the program change is fully effective. It makes you press three buttons in a row to switch program... It might be long, but you can easily get use to it...
  • during this process, the knobs can be used at step 2. You don't need to finalise it. It's a trick every ldp8 must know!
  • there's a knob issue with soft takeover (when you switch the program, the knobs and pad are affectted to a new midi channel, so the midi state on the previous midi channel doesn't change, wich makes the soft takeover irrelevant : when you turn back in another program, the knob physic position has changed but his Midi state hasn't change at all...It's not like a modifier...)


Hope it answers your questions...

@Jon E : How are your knobs programmed? are they on direct or relative mode?
Veda Zarella
08.11.2011		Is it possible to change between programs on the fly or does this mess up the mapping ?
Van Slowikowski
10.10.2011		haha let me know how it goes
Nicholas Karty
09.10.2011		This sounds like exactly what Ive been looking for/too lazy to do myself, will try it when I get home

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy