How to Route the S4 to speakers. (directly)
Home :: NI - Native Instruments S4/S2 Controller talk :: How to Route the S4 to speakers. (directly)Reply
How to Route the S4 to speakers. (directly) Posted on: 08.12.2012 by Clare Arnhold Hey DJ Techtools Forum,Last evening was my buddy and I's first real live performance. It was a school dance for about three and a half hours. While setting up we realized that the original plan we had for the main out did not work, but we were able to use two 1/4 inch cables going from the main out on the S4 to another mixer with the two 3-Pin XLR's running into that and out to the speakers. The music was loud enough (these were 12,13, and 14 year olds), but definitely could have been louder. We want to have the main out on the S4 feed directly to speakers, via an adapter or such. If anything thing comes to mind that would make this work we would be happy to hear it! Any other suggestions are appreciated as well! Thank you, Marty | |
| Katharine Fattore 11.12.2012 |
Originally Posted by antifmradio
LOL ya. i've had problems with RCA out to 1/4inch input in the past with different mixers and shit. I just run 1/4inch to 1/4inch on the 8channel mixer, OR i have ALSO done the 1/4inch to XLR left and the same for the right straight into the speakers. if you are using sub, run your LEFT and RIGHT into the inputs on the sub, and then run your highpass (or whatever your outputs are) to the speakers last. not sure what you're setup is... |
| Clare Arnhold 08.12.2012 |
Originally Posted by VanGogo
|
| Clare Arnhold 08.12.2012 | Hey DJ Techtools Forum, Last evening was my buddy and I's first real live performance. It was a school dance for about three and a half hours. While setting up we realized that the original plan we had for the main out did not work, but we were able to use two 1/4 inch cables going from the main out on the S4 to another mixer with the two 3-Pin XLR's running into that and out to the speakers. The music was loud enough (these were 12,13, and 14 year olds), but definitely could have been louder. We want to have the main out on the S4 feed directly to speakers, via an adapter or such. If anything thing comes to mind that would make this work we would be happy to hear it! Any other suggestions are appreciated as well! Thank you, Marty |
| Katharine Fattore 11.12.2012 |
Originally Posted by antifmradio
LOL ya. i've had problems with RCA out to 1/4inch input in the past with different mixers and shit. I just run 1/4inch to 1/4inch on the 8channel mixer, OR i have ALSO done the 1/4inch to XLR left and the same for the right straight into the speakers. if you are using sub, run your LEFT and RIGHT into the inputs on the sub, and then run your highpass (or whatever your outputs are) to the speakers last. not sure what you're setup is... |
| Libbie Orion 10.12.2012 | god i hope those were powered speakers lol jjust didnt say it in the text above |
| Charline Dye 08.12.2012 | Monoprice.com is a good place for inexpensive cables. They have 1/4 TRS to XLR cables in different lengths. |
| Clare Arnhold 08.12.2012 |
Originally Posted by VanGogo
|
| Harley Zitka 08.12.2012 | All DJ's using their own gear should have the following in their DJ bag: RCA Cables 1/4" cables (if your mixer or controller has 1/4" ouputs XLR cables (if your mixer has XLR outputs) 1/4" to XLR adapters You shouldn't lose any output by going through an additional mixer... if anything it should increase. If you need more volume, you probably need more speakers. |
| Charline Dye 08.12.2012 | What connection do your speakers use? 1/4 TRS or XLR? You can just buy cables that have the right connections. |
<< Back to NI - Native Instruments S4/S2 Controller talkReply